Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ OPTIMA
Operation - AUTOMATIC “OPTIMA”
ГЛАВНОЕ МЕНЮ РЕЖИМА OPTIMA
OPTIMA
(Рис. 7-37):
F1
1 OPTIMA
2 (Matching)
F6
3 .
.
БАЛАНСИРОВКА В РЕЖИМЕ OPTIMA
OPTIMA
(Рис. 7-38):
F1
1 OPTIMA
2 (Matching)
F4
3 PROFILING
4 OPTIMA FULL DIAGNOSTIC
F6
5 .
.
“OPTIMA” MAIN MENU
The following additional items can be found in the Entry
Screen (Fig. 7-37) in Optima mode:
F1 Menu
1 Access to the Optima Diagnostics screen
2 Access to the Matching screen
F6 Menu
3 Select Print of the current Screen.
For information about the other items and icons, refer to
the basic chapter "Control Elements".
“OPTIMA” BALANCING
The following additional items can be found in the
Balancer Screen (Fig. 7-38) in Optima mode:
F1 Menu
1 Access to the OPTIMA ENTRY Diagnostics screen
2 Access to the Matching screen
F4 Menu
3 Select the PROFILING Mode
4 Select the OPTIMA FULL DIAGNOSTIC Mode
F6 Menu
5 Print the Balancing results.
For information about the other items and icons, refer to
the basic chapter "Control Elements".
To Next Page
Loading...