Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ OPTIMA
Operation - AUTOMATIC “OPTIMA”
ВВОД ДАННЫХ КОЛЕСА В РЕЖИМЕ OPTIMA
OPTIMA
(Рис. 7-39):
(Рис. 7-39)
F1
1 Блокировка данных колеса (Rim Data Freeze)
.
ОКНО ОПТИМИЗАЦИИ
F1 Optima
Optimization Entry Screen
(Рис. 7-40) :
(Рис. 7-40)
F5
1 .
2 .
.
RIM DATA INPUT “OPTIMA”
The following additional items can be found in the Rim
Data Entry screen (Fig. 7-39) in Optima mode:
(Fig. 7-39)
F1
1 Select Rim Data Freeze
For information about the other items and icons, refer to
the basic chapter "Control Elements".
“OPTIMIZATION ENTRY SCREEN”
The key in the F1 Menu in Optima mode, used to
access the Optimization Entry Screen, takes you to
the next screen (Fig. 7-40) which contains the
following:
(Fig. 7-40)
F5 Menu
1 Access to the geometrical Matching of the complete
wheel.
2 Access to the geometrical Matching of just the rim.
For information about the other items and icons, refer to
the basic chapter "Control Elements".
To Next Page
Loading...