Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ OPTIMA
Operation - AUTOMATIC “OPTIMA”
M) RIM ONLY.
"Enabled"
RIM ONLY.
"Disabled"
.
N)
RIM ONLY.
: 0,7 .
O)
RIM ONLY.
: 0.5 .
P)
RIM ONLY.
: 0.7 .
Q)
RIM ONLY.
: 0.5 .
R)
.
Optima Access.
= .. = .
M) Allows selection of RIM ONLY advanced diagnosis.
Select "Enabled" = Enables RIM ONLY advanced
diagnosis. Select "Disabled" = Enables automatic
switching to the MATCHING procedure if the machine
detects the presence of the rim only.
N) Limit (threshold) for RIM ONLY peak to peak radial
Runout. Preset value: 0.7 mm.
O) Limit (threshold) for RIM ONLY first harmonic radial
Runout. Preset value: 0.5 mm.
P) Limit (threshold) for RIM ONLY peak to peak lateral
Runout. Preset value: 0.7 mm.
Q) Limit (threshold) for RIM ONLY first harmonic lateral
Runout. Preset value: 0.5 mm.
R) Manages the Find Flat Spot option. This function
detects flattening of the tread. If flat spots are
detected, an alert message appears in the Optima
Access screen page.
= Enables search. = Disables search.
To Next Page
Loading...