Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ
OPTIMA FULL DIAGNOSTIC
Operation - AUTOMATIC
"OPTIMA FULL DIAGNOSTIC"
:
Рис. 7-98
a .
b /. .
c .
d
.
e .
f .
"OPTIMA
DIAGNOSTIC " :
F3 , 5 (Рис. 7-98),
:
Рис. 7-99
F1 .
F2 .
F3
.
F4
. .
F5 /
.
.
F6 .
1
2
.
3 .
:
• .
.
Примечание:
.
• (F3)
(F5).
•
(F6).
"d"
:
-
- .
The screen contains the following fields:
Fig. 7-98
a Wheel Id. Identification code.
b Km/ miles. Distance covered by the wheel.
c Tread Wear Curve graph.
d Table with the residual distance to cover and Prediction
of the date the threshold limits will be reached.
e Current date.
f Measured tread depth.
To activate the function, in the "OPTIMA DIAGNOSTIC "
screen select:
Menu F3 , Voce 5 (Fig. 7-98),
In the "Predictive" screen, the Menu keys perform the
following:
Fig. 7-99
F1 Main Menu.
F2 Go back to the previous screen.
F3 Switches between the Wheel Id and Km/miles fields.
F4 Moves the next position in the Wheel Id field. Press
the key in the right or left.
F5 Changes the value to set in the Km/miles field /
Changes the character to set for the Wheel Id . Keep
pressed on the top or bottom and then use the Scroll.
F6 Manages the archive.
1 Introduces the data set
2 Loads from the memory and displays the values for
the Wheel Id set.
3 Deletes the wheel data.
In the "Predictive" screen, after the run, perform the
following:
• Enter the univocal Wheel Id code. The machine always
shows the date.
Note:
If the wheel has been memorised previously, enter the
code to recall it.
• Go to the Distance covered by the wheel field (F3) and
enter the distance indicated in the vehicle odometer
(F5).
• Memorise or update the screen before memorising
definitively (F6).
Field "d" displays the residual distance to cover and the
estimated date for the maintenance to perform the
following:
- Tread wear warning level
- Replace the worn tyre.
To Next Page
Loading...