Отпимизация / минимизация
Optimisation/ Weight minimisation
9.3.4 Завершение программы оптимизации /
минимизации
Рис. 9-22 14
:
H0
.
H1
.
H2
,
.
:
OK
.
:
OK
.
:
• F1
(Рис. 9-23).
9.3.4 Finish weight minimisation / optimisation
Fig. 9-22 OPTIMISATION 14
If the wheel running conditions are optimal, the following
codes can be displayed:
H0 Wheel running conditions cannot be improved by
optimisation.
H1 Further optimisation not recommended but feasible.
H2 Weight minimisation is recommended, optimisation
can achieve no further improvement.
If optimisation has been performed:
The pictograph OK shows that optimisation was carried
out correctly and has been completed successfully.
If minimisation has been performed:
The pictograph OK shows that minimisation was carried
out correctly and has been completed successfully.
To return to the BALANCING screen:
• Press the F1 Menu key and select the BALANCING
item (Figure 9-23).
To Next Page
Loading...