H0
.
H1
.
H2
.
H3
.
H20
.
•
.
H21
.
•
.
H26
.
• ,
.
H28
.
• ,
.
H0
Wheel running conditions cannot be improved by
optimisation.
H1
Further optimisation not recommended but feasible.
H2
Weight minimisation is recommended, optimisation can
achieve no further improvement.
H3
Optimisation not recommanded.
H20
Correction plane cannot be relocated with the gauge arm
for distance and rim diameter.
• Measure the correction plane and switch to
dynamic unbalance reading.
H21
The indexed position is not the one for the correction plane
in which the adhesive weight is to be fitted with the gauge
arm.
• Index the correct position for this correction plane
prior to fitting the adhesive weight.
H26
The gauge arm was moved too quickly.
• Return the gauge arm to its home position and then
approach it slowly to the weight fitting position once
more.
H28
The gauge arm was moved too slow.
• Move gauge arm back into the home position and
then bring it once more to the application point for
weight placement.
To Next Page
Loading...