ГЛАВНОЕ МЕНЮ
F1 (Рис.4-4)
:
1
2
3
4
.
F4 :
5
6
7
8 Weight Miser ( )
F6
9
БАЛАНСИРОВКА
F1 (Рис. 4-5)
:
1
2
3
4 (HOME)
F2 :
5 ALU 0
6 ALU 1
7 ALU 2
8 ALU 3
9 ALU 4
10 ALU 5
ALU P.
F3
:
11
12
13
14
F4 :
15
16
17
18 Weight Miser ( )
F6
19
MAIN MENU
The Main menu F1 in the Start Screen (Fig.4-4), contains the
access items to the most common operational screens:
1 Access to BALANCING
2 Access to RIM DATA INPUT
3 Access to OPTIMISATION/MINIMISATION
4 Access to SETTINGS
The entire machine operational cycle and the user pre-settings
can be managed from these screens.
The F4 menu contains the following setting items:
5 Static unbalance Selection
6 Weights Fine Reading Selection
7 Grams / Ounces Selection
8 Weight Miser Selection (if present)
Menu F6
9 Access to COMPENSATION RUN
BALANCING
The F1 Menu in the Balancing screen (Fig. 4-5), contains the
access items to the following screens:
1 Access to RIM DATA INPUT
2 Access to OPTIMISATION
3 Access to SETTINGS
4 Go back to the START SCREEN (HOME)
The F2 Menu contains the various ALU selection items:
5 ALU 0 Selection
6 ALU 1 Selection
7 ALU 2 Selection
8 ALU 3 Selection
9 ALU 4 Selection
10 ALU 5 Selection
None of the Menu items can enable ALU P selections.
The F3 menu contains the following items to select the Type
of Vehicle settings:
11 CAR Selection
12 SUV Selection
13 VAN Selection
14 MOTORCYCLE Selection
The F4 menu contains the following setting items:
15 Static unbalance Selection
16 Weights Fine Reading Selection
17 Grams / Ounces Selection
18 Weight Miser Selection (if present)
Menu F6
19 Access to COMPENSATION RUN
To Next Page
Loading...