JRC JMA-9822-6XA - Page 161

3 – 90
3
3.4 BASIC OPERATIONS
.
..
3 Readout Navigational Information Display (Radar Internal Data)
Only when navigational equipment is connected to the system or when own ship’s
position is entered manually, the readout files can be selected. The selecting method is
different depending upon the type of device to load the readout data.
When Setting DEVICE to INTERNAL
1 Press .
The LOAD DATA Menu will appear.
2 Press any of to to select any
navigational information item assigned by any number
of 0 to 9.
3 Press (YES) to the question “FILE LOAD OK?”
if the file name is right.
The selected number of navigational information will be read
out.
To cancel file loading, press (NO).
4 The selected file name will appear at the lower right of the radar display.
2
1
9
0
2
Procedures
SUB1 MENU
NAV/MAP INFO
NAV/MAP
LOAD
LOAD DATA
PRESS EXIT OR[CLR]
EXIT:
0001.
3.
2.
1.
4.
5.
6.
7.
8.
9.
0.