Juniper ACX1000 - Page 138

}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
16. Commit the configuration to activate it on the router.
[edit]
root@# commit
17. (Optional) Configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
18. When you have finished configuring the router, exit configuration mode.
[edit]
root@host# exit
root@host>
Related
Documentation
• ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 5
• Protocols and Applications Supported by ACX Series Routers on page 9
Copyright © 2017, Juniper Networks, Inc.120
ACX1000 and ACX1100 Universal Access Router