WARNING: The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallicallyconnected to interfaces that connect tothe Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and
require isolation from the exposed OSP cabling. The addition of primary
protectors is not sufficient protection in order to connect these interfaces
metallically to OSP wiring.
Related
Documentation
• General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices
on page 185
Copyright © 2017, Juniper Networks, Inc.192
ACX1000 and ACX1100 Universal Access Router
To Next Page
Loading...
Need help?
General
