Kamstrup ULTRAFLOW 54 Series - Installation Examples (Mechanical); MULTICAL Mounted on ULTRAFLOW 54 (H); Installation on an Ascending Pipe; Installations at Eye Level or Higher

ULTRAFLOW®54(H)/(J)
KamstrupA/S∙TechnicalDescription∙5512‐1554_J1_GB_04.2018
25
7.5 Installation examples (mechanical)
MULTICAL
®
602/6L2/603 and by means of installation fitting 3026-857 even MULTICAL
®
801 can all directly be
mounted on top of ULTRAFLOW
®
54 (H)/(J).
7.5.1 MULTICAL
®
mounted on ULTRAFLOW
®
54 (H)
7.5.1.1 Installation on an ascending pipe
Figure 13. MULTICAL
®
mounted on ULTRAFLOW
®
mounted on an ascending pipe.
When installing ULTRAFLOW
®
on an ascending pipe, it can be of advantage to turn ULTRAFLOW
®
±360° around the
pipe axis to optimize the readability of the MULTICAL
®
display at direct mounting of MULTICAL
®
on ULTRAFLOW
®
.
7.5.1.2 Installations at eye level or higher
Figure 14. MULTICAL
®
mounted on ULTRAFLOW
®
when installed at eye level or higher.
In case of installations above eye level, it can be of advantage to turn ULTRAFLOW
®
-45° downwards to optimise
the readability of the MULTICAL
®
display at direct mounting of MULTICAL
®
on ULTRAFLOW
®
.