ULTRAFLOW®54(H)/(J)
68
KamstrupA/S∙TechnicalDescription∙5512‐1554_J1_GB_04.2018
10.3 METERTOOL for ULTRAFLOW
®
X4
The menu structure of METERTOOL for ULTRAFLOW
®
X4 is as follows:
10.3.1 Files
The menu ”Files” includes:
Setup Update of program and database
(internet connection required) and
setup of COM-port for interface of
flow sensor and Pulse Divider.
Exit: Terminates METERTOOL.
Force Database Update: Forced online-update of database.
10.3.2 Utilities
The menu ”Utilities” includes:
Flow Meter Adjustment: Reading and correction of flow curve.
Program Flow Meter: Programming standard flow curve for
flow sensor.
Pulse Divider: Programming of Pulse Divider 66-99-
607.
Pulse Configuration Programming of meter factor and
DN150-300: pulse duration for ULTRAFLOW
®
54
DN150-300.
Meter Type: Information on flow sensor and equipment.