EasyManuals Logo

Kamstrup ULTRAFLOW 54 Series User Manual

Kamstrup ULTRAFLOW 54 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
ULTRAFLOW®54(H)/(J)
KamstrupA/S∙TechnicalDescription∙5512‐1554_J1_GB_04.2018
89
14 Disposal
Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of Kamstrup's environment
policy materials which can be recovered environmentally correctly are used to the greatest possible extent.
Kamstrup A/S has climate accounts (Carbon footprint) for all meter types.
Disposal by Kamstrup A/S
Kamstrup A/S accepts worn-out meters
for environmentally correct disposal according to previous agreement.
The disposal is free of charge to our customers, except for the cost of transportation to Kamstrup A/S.
The customer sends for disposal
The meters must not be disassembled prior to dispatch. The complete meter is handed in for approved
national/local disposal. Enclose a copy of this page in order to inform the recipient of the contents.
Lithium cells and meters including lithium cells must, therefore, be forwarded as dangerous goods. (See Kamstrup
document 5510-408, ”Lithium batteries - Handling and disposal”).
Meter part Material Recommended disposal
Lithium cells in Pulse Transmitter/
Pulse Divider (D-cell)
Lithium and thionyl chloride
> UN 3091 < D-cell: 4.9 g lithium
Approved deposit of lithium cells
PCBs in Pulse Transmitter,
Pulse Divider and ULTRAFLOW
®
Coppered epoxy laminate,
components soldered on
PCB scrap for concentration to noble
metals
Flow sensor cables Copper with silicone mantle Cable recycling
Plastic parts, cast PES, PC and ABS. See material data Plastic recycling
ULTRAFLOW
®
meter case
DZR brass Metal recycling
Packing Recycled cardboard and EPS Cardboard recycling (Resy) and EPS
recycling
Please send any questions you may have regarding environmental matters to:
Kamstrup's heat meters are marked according to EU Directive 2012/19/EU
and the standard EN 50419.
The purpose of the marking is to inform our customers that the heat meter
cannot be disposed of as ordinary waste.
Kamstrup A/S
Att.: Quality and environmental dept.
Fax: +45 89 93 10 01
info@kamstrup.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kamstrup ULTRAFLOW 54 Series and is the answer not in the manual?

Kamstrup ULTRAFLOW 54 Series Specifications

General IconGeneral
BrandKamstrup
ModelULTRAFLOW 54 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals