ULTRAFLOW®54(H)/(J)
KamstrupA/S∙TechnicalDescription∙5512‐1554_J1_GB_04.2018
67
10.2.2 Installation
Check that system requirements are fulfilled.
Close other open programs before starting the installation.
Insert the CD into the drive and follow the program’s instructions during installation.
Note: The files used for installation must be saved on a CD or in a local folder in the PC. Installation is not possible
using files from a USB-stick or an external drive.
If the installation program does not start automatically, the installation can be started by typing “D:\CD\launch.exe”
under "Run" in the Start menu (provided that the drive specification of the CD is “D”).
When the installation has been completed, the icon “KAMSTRUP METERTOOL” will appear from the Start menu and
as a link on the desktop. Click on the new icon “KAMSTRUP METERTOOL” for the list of “METERTOOL” programs
selected during installation to be displayed. Double-click on “METERTOOL UFx4” in order to start the program
”METERTOOL for ULTRAFLOW
®
X4”.
To Next Page
Loading...
Need help?
General
