KeeNetic Lite KN-1310 User Manual

Arguments
DescriptionValueArgument
Interface priority to congure the default
route. Can take values from 1 to 65534.
Integerpriority
Example
(config-if)> ip global 10
Interface is set as global.
History
Version Description
The interface ip global command has been introduced.2.00
3.16.55 interface ip mru
Description Set the value of MRU to be transmitted to a remote node during establishing
the PPP (IPCP) connection. By default, 1460 value is used.
Command with no prex cancels the command.
Prex no Yes
Change settings Yes
Multiple input No
Interface type PPP
Synopsis
(cong-if)> ip mru ‹mru›
(cong-if)> no ip mru
Arguments
DescriptionValueArgument
MRU value.Integermru
Example
(config-if)> ip mru 1400
MRU saved.
History
Version Description
The interface ip mru command has been introduced.2.00
3.16.56 interface ip mtu
Description Set the MTU value on the network interface. When establishing a connection
via PPP (IPCP), packets with dened MTU size will be sent to the remote host,
even if the host requested a lower MTU value.
Command Reference Guide — Keenetic Lite (KN-1310)
112
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English