KeeNetic Lite KN-1310 User Manual

Arguments
DescriptionValueArgument
Full interface name or an alias.Interface namesource-interface
The number of attempts.Integercount
Request time in seconds. Can take
values from 1 to 10.
Integerseconds
Example
(tools)> pppoe-discovery interface ISP retry-count 5 wait-time 9
Discovering PPPoE access concentrators on eth2.2...
AC name : accel-ppp
HW address: aa:09:a0:11:64:44
Service:
AC name : accel-ppp
HW address: de:06:21:02:b3:e2
Service:
process terminated
History
Version Description
The tools pppoe-discovery command has been
introduced.
2.00
3.79.5 tools traceroute
Description Show the route to a network host.
Prex no No
Change settings No
Multiple input No
Synopsis
(tools)> traceroute ‹host› [count ‹count›] [interval ‹interval›]
[wait-time ‹wait-time›] [packet-size ‹packet-size›]
[max-ttl ‹max-ttl›] [port ‹port›] [source-address ‹source-address›]
[source-interface ‹source-interface›] [type ‹type›] [tos ‹tos›]
Arguments
DescriptionValueArgument
Name of the target host.Stringhost
Number of probe packets per hop.
Default value — 3. Value must be
in the range [1;10].
Integercount
Time in seconds between sending
packets. Default value — 0. Value
must be in the range [0;15].
Integerinterval
Time to wait for a response to a
probe (in seconds). Default value
Integerwait-time
Command Reference Guide — Keenetic Lite (KN-1310)
272
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English