History
Version Description
The interface ipsec ikev2 command has been
introduced.
2.10
3.16.66 interface ipsec preshared-key
Description Set PSK key for IPSec connection that is automatically associated with the
tunnel. Command also enables IPSec for this tunnel.
Command with no prex resets the key.
Prex no Yes
Change settings Yes
Multiple input No
Interface type Secure
Synopsis
(cong-if)> ipsec preshared-key ‹key›
(cong-if)> no ipsec preshared-key
Arguments
DescriptionValueArgument
Secret PSK key value.Stringkey
Example
(config-if)> ipsec preshared-key 12345678
Network::Interface::Secure: "Gre0": preshared key was set.
(config-if)> no ipsec preshared-key
Network::Interface::Secure: "Gre0": preshared key was reset.
History
Version Description
The interface ipsec preshared-key command has been
introduced.
2.08
3.16.67 interface ipv6 address
Description Confgure an IPv6 address on the interface. If the argument is auto, address
is autocongured. Passing a literal address as an argument will assign it
statically.
Command with no prex removes the setting.
Prex no Yes
Change settings Yes
Keenetic Lite (KN-1310) — Command Reference Guide
119
Chapter 3 Command Reference