KeeNetic Lite KN-1310 User Manual

3.18 ip dhcp class
Description Access to a group of commands to congure DHCP vendor class (option 60).
If specied class name is not found, the command tries to create it.
Command with no prex removes selected class.
Prex no Yes
Change settings No
Multiple input Yes
Group entry (config-dhcp-class)
Synopsis
(cong)> ip dhcp class ‹class›
(cong)> no ip dhcp class ‹class›
Arguments
DescriptionValueArgument
The vendor-class name.Stringclass
Example
(config)> ip dhcp class STB-One
Dhcp::Server: Vendor class "STB-One" has been created.
History
Version Description
The ip dhcp class command has been introduced.2.00
3.18.1 ip dhcp class option
Description Set an option 60 to match the vendor-class.
Command with no prex removes selected option.
Prex no Yes
Change settings Yes
Multiple input Yes
Synopsis
(cong-dhcp-class)> option ‹number› hex ‹data›
(cong-dhcp-class)> no option ‹number›
Arguments
DescriptionValueArgument
Option number. Now the only 60 value is
used.
Integernumber
Command Reference Guide — Keenetic Lite (KN-1310)
150
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English