KeeNetic Lite KN-1310 User Manual

2.6 Delayed restart
If Keenetic Lite device is located away from the operator and is managed remotely, there
is a risk to lose control over it because of a misoperation. In this case it will be difcult to
reboot and return to the saved settings.
The system reboot command lets you set a delayed restart timer, perform “risky” settings,
then turn off the timer and save the changes. If connection to the device is lost during
conguration, the operator will be enough to wait for automatic reboot and connect to
the device again.
Keenetic Lite (KN-1310) — Command Reference Guide
25
Chapter 2 Introduction to the CLI

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English