KeeNetic Lite KN-1310 User Manual

Example
(config)> crypto ike key test 12345678 email ipsec@example.org
IpSec::Manager: Crypto ike key "test" successfully added.
History
Version Description
The crypto ike key command has been introduced.2.06
3.8 crypto ike nat-keepalive
Description Set the timeout between keepalive packets in case of NAT between the client
and server IPsec. By default, 90 value is set.
Command with no prex resets setting to default.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong)> crypto ike nat-keepalive ‹nat-keepalive›
(cong)> no crypto ike nat-keepalive
Arguments
DescriptionValueArgument
Timeout between keepalive
packets in seconds. Can take
values from 5 to 3600 inclusively.
Integernat-keepalive
Example
(config)> crypto ike nat-keepalive 20
IpSec::Manager: Set crypto ike nat-keepalive timeout to 20 s.
History
Version Description
The crypto ike nat-keepalive command has been
introduced.
2.06
3.9 crypto ike policy
Description Access to a group of commands to congure selected IKE policy. If IKE policy
is not found, the command tries to create it.
Command with no prex removes IKE policy. At the same time references to
this IKE policy are automatically deleted from all IPsec proles.
Prex no Yes
Change settings Yes
Keenetic Lite (KN-1310) — Command Reference Guide
43
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English