KeeNetic Lite KN-1310 User Manual

3.16.19 interface debug
Description Enable debug mode of PPP connection. Detailed info about connection
progress is saved to the system log. By default, setting is disabled.
Command with no prex disables the debug mode.
Prex no Yes
Change settings Yes
Multiple input No
Interface type PPP
Synopsis
(cong-if)> debug
(cong-if)> no debug
Example
(config-if)> debug
Debug enabled.
History
Version Description
The interface debug command has been introduced.2.00
3.16.20 interface description
Description Assign arbitrary descrption to the specied network interface.
Command with no prex deletes the description.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> description ‹description›
(cong-if)> no description
Arguments
DescriptionValueArgument
Arbitrary description of the interface.Stringdescription
Example
(config-if)> description 111_2222_33333
Interface description saved.
Command Reference Guide — Keenetic Lite (KN-1310)
90
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English