KeeNetic Lite KN-1310 User Manual

3.80.5 udpxy renew-interval
Description Set renew interval of subscription to the multicast channel. By default, 0 value
is used, ie the subscription is not renewed.
Command with no prex resets setting to default.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(udpxy)> renew-interval ‹renew-interval›
(udpxy)> no renew-interval
Arguments
DescriptionValueArgument
Renew interval of subscription in seconds.
Can take values from 0 to 3600.
Integerrenew-interval
Example
(udpxy)> renew-interval 120
Udpxy::Manager: a renew subscription interval value set to 120 ►
sec.
History
Version Description
The udpxy renew-interval command has been
introduced.
2.03
3.80.6 udpxy timeout
Description Set connection timeout. By default, 5 value is used.
Command with no prex resets setting to default.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(udpxy)> timeout ‹timeout›
(udpxy)> no timeout
Arguments
DescriptionValueArgument
Timeout in seconds. Can take values from
5 to 60.
Integertimeout
Keenetic Lite (KN-1310) — Command Reference Guide
277
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English