KeeNetic Lite KN-1310 User Manual

3.16.8 interface authentication password
Description Specify password for device authentication on the remote system. Equally
often used on PPTP, PPPoE and L2TP connections.
Command with no prex deletes the password.
Prex no Yes
Change settings Yes
Multiple input No
Interface type Secure
Synopsis
(cong-if)> authentication password ‹password›
(cong-if)> no authentication password
Arguments
DescriptionValueArgument
Password for authentication.Stringpassword
Example
(config-if)> authentication password 1234
Password saved.
History
Version Description
The interface authentication password command has
been introduced.
2.00
3.16.9 interface authentication shared
Description Enable authentication with a shared key. This mode is used only in conjunction
with WEP encryption. Shared keys are specied by interface encryption key
command.
Command with no prex turns authentication to open mode.
Prex no Yes
Change settings Yes
Multiple input No
Interface type WiFi
Synopsis
(cong-if)> authentication shared
(cong-if)> no authentication shared
Keenetic Lite (KN-1310) — Command Reference Guide
83
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English