KeeNetic Lite KN-1310 User Manual

Prex no Yes
Change settings Yes
Multiple input No
Interface type Tunnel
Synopsis
(cong-if)> tunnel destination ‹destination›
(cong-if)> no tunnel destination
Arguments
DescriptionValueArgument
IP address or domain name of the remote
host.
Stringdestination
Example
(config-if)> tunnel destination ya.ru
Network::Interface::Tunnel: "Gre0": destination set to ya.ru.
(config-if)> no tunnel destination
Network::Interface::Tunnel: "Gre0": destination was reset.
History
Version Description
The interface tunnel destination command has been
introduced.
2.08
3.16.99 interface tunnel eoip id
Description Set identier of EoIP tunnel.
Command with no prex resets the setting.
Prex no Yes
Change settings Yes
Multiple input No
Interface type Eoip
Synopsis
(cong-if)> tunnel eoip id ‹id›
(cong-if)> no tunnel eoip id
Arguments
DescriptionValueArgument
Tunnel ID.Integerid
Command Reference Guide — Keenetic Lite (KN-1310)
142
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English