KeeNetic Lite KN-1310 User Manual

Command with no prex removes the setting.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> ipv6 name-servers (auto)
(cong-if)> no ipv6 name-servers [auto]
Arguments
DescriptionValueArgument
Enable name-server autoconguration.Keywordauto
Example
(config-if)> ipv6 name-servers auto
Name servers provided by the interface network are accepted.
History
Version Description
The interface ipv6 name-servers command has been
introduced.
2.00
3.16.70 interface ipv6 prex
Description Congure prex delegation. When auto is set, prex is requested via
DHCPv6-PD.
Command with no prex removes the setting.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> ipv6 prefix ( ‹prefix› | auto)
(cong-if)> no ipv6 prefix [ ‹prefix› | auto]
Arguments
DescriptionValueArgument
Enable prex delegation.Keywordauto
Manual input of prex.Prefixprefix
Example
(config-if)> ipv6 prefix 2001:db8:43:ab12::/64
Static IPv6 prefix added.
Keenetic Lite (KN-1310) — Command Reference Guide
121
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English