KeeNetic Lite KN-1310 User Manual

Arguments
DescriptionValueArgument
Name server address.IP-addressaddress
Domain for which the server will be used.
In resolving names the DNS-proxy rst
Stringdomain
selects the address of the server with name
best matching the requested domain. If
the domain is not specied, the server will
be used for all requests.
Interface name to congure.Interface
name
interface
Example
(config)> ip name-server 192.168.1.33
added name server 192.168.1.33, domain (default).
History
Version Description
The ip name-server command has been introduced.2.00
3.32 ip nat
Description Enable translation of “local” addresses of network network or network behind
the interface interface. For example, command ip nat Home means that
all packets from the network Home, passing through the router will undergo
IP spoong.
Prex no Yes
Change settings Yes
Multiple input Yes
Interface type IP
Synopsis
(cong)> ip nat ( ‹interface› | ‹address› ‹mask› )
(cong)> no ip nat ( ‹interface› | ‹address› ‹mask› )
Arguments
DescriptionValueArgument
Source interface name (full name or an
alias).
Interface
name
interface
Together with mask mask sets the range
of source IP-addresses to be translated.
IP-addressaddress
Mask of a translation range. There are two
ways to enter the mask: the canonical form
IP-maskmask
(for example, 255.255.255.0) and the
form of prex bit length (for example, /24).
Keenetic Lite (KN-1310) — Command Reference Guide
175
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English