number: 4
ext-40-above: yes
ext-40-below: yes
vht-80: yes
channel, index = 4:
number: 5
ext-40-above: yes
ext-40-below: yes
vht-80: yes
channel, index = 5:
number: 6
ext-40-above: yes
ext-40-below: yes
vht-80: yes
channel, index = 6:
number: 7
ext-40-above: yes
ext-40-below: yes
vht-80: yes
channel, index = 7:
number: 8
ext-40-above: yes
ext-40-below: yes
vht-80: yes
...
...
...
History
Version Description
The show interface channels command has been
introduced.
2.03
3.74.11 show interface country-codes
Description Show the list of available country codes on a radio interface.
Prex no No
Change settings No
Multiple input No
Interface type Radio
Synopsis
(show)> interface ‹name› country-codes
Keenetic Lite (KN-1310) — Command Reference Guide
229
Chapter 3 Command Reference