KeeNetic Lite KN-1310 User Manual

3.16.64 interface ipsec ignore
Description Disable IPSec service for the interface.
Command with no prex cancels the setting.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> ipsec ignore
(cong-if)> no ipsec ignore
Example
(config-if)> ipsec ignore
IpSec::Manager: Interface "Gre0" added to IPsec ignore list.
(config-if)> no ipsec ignore
IpSec::Manager: Interface "Gre0" removed from IPsec ignore list.
History
Version Description
The interface ipsec ignore command has been
introduced.
2.10
3.16.65 interface ipsec ikev2
Description Enable IKEv2 protocol for IPSec connection that is automatically associated
with the tunnel. By default, IKEv1 is used.
Command with no prex resets setting to default.
Prex no Yes
Change settings Yes
Multiple input No
Interface type Secure
Synopsis
(cong-if)> ipsec ikev2
(cong-if)> no ipsec ikev2
Example
(config-if)> ipsec ikev2
Network::Interface::Secure: IKEv2 is enabled.
(config-if)> no ipsec ikev2
Network::Interface::Secure: IKEv2 is disabled, enable IKEv1.
Command Reference Guide — Keenetic Lite (KN-1310)
118
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English