KeeNetic Lite KN-1310 User Manual

Example
(config-if)> igmp fork
fork role assigned to ISP.
History
Version Description
The interface igmp fork command has been introduced.2.00
3.16.35 interface igmp upstream
Description Enable IGMP mode on the interface in the direction of the multicast source.
service igmp-proxy must be enabled on the device. Only one upstream
interface is allowed.
Command with no prex disables the mode.
Prex no Yes
Change settings Yes
Multiple input No
Interface type IP
Synopsis
(cong-if)> igmp upstream
(cong-if)> no igmp upstream
Example
(config-if)> igmp upstream
upstream role assigned to ISP.
History
Version Description
The interface igmp upstream command has been
introduced.
2.00
3.16.36 interface include
Description Specify Ethernet-interface name which will be added to the software bridge
as a port.
Command with no prex removes the interface from the bridge.
Prex no Yes
Change settings Yes
Multiple input Yes
Interface type Bridge
Keenetic Lite (KN-1310) — Command Reference Guide
99
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English