KeeNetic Lite KN-1310 User Manual

3.49 ntp server
Description Add a new NTP-server to the list. You can enter up to 8 NTP-servers.
Command with no prex deletes NTP-server from the list. If you use no
argument, the entire list of NTP-servers will be removed.
Prex no Yes
Change settings Yes
Multiple input Yes
Synopsis
(cong)> ntp server ‹host›
(cong)> no ntp server [ host ]
Arguments
DescriptionValueArgument
Host of NTP-server.Stringhost
Example
(config)> ntp server 2.ru.pool.ntp.org
server "2.ru.pool.ntp.org" has been added.
History
Version Description
The ntp server command has been introduced.2.00
3.50 ntp sync-period
Description Set a period for time sinchronization. By default, 1 week is used.
Command with no prex resets time sinchronization to default.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong)> ntp sync-period ‹time›
(cong)> no ntp sync-period
Arguments
DescriptionValueArgument
Time sinchronization, in minutes. Can take
values from 60 minutes to 1 month.
Integertime
Keenetic Lite (KN-1310) — Command Reference Guide
199
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English