KeeNetic Lite KN-1310 User Manual

3.16.101 interface tx-burst
Description Enable Wi-Fi packet aggregation (Tx Burst). By default, the setting is disabled.
Command with no prex disables the setting.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> tx-burst
(cong-if)> no tx-burst
Example
(config-if)> tx-burst
Network::Interface::Rtx::WifiMaster: Tx Burst enabled.
History
Version Description
The interface tx-burst command has been introduced.2.07
3.16.102 interface tx-queue
Description Set the size of the queue of outgoing packets on the interface. By default
1000 is set.
Command with no prex resets to default.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-if)> tx-queue ‹length›
(cong-if)> no tx-queue
Arguments
DescriptionValueArgument
Queue length can take values from 0 to
65536.
Integerlength
Example
(config-if)> tx-queue 255
Tx queue length saved.
Command Reference Guide — Keenetic Lite (KN-1310)
144
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English