KeeNetic Lite KN-1310 User Manual

Arguments
DescriptionValueArgument
Lease time in seconds.Integerlease
Example
(config-dhcp-pool)> lease 100500
pool "test_pool" lease has been changed.
History
Version Description
The ip dhcp pool lease command has been introduced.2.00
3.20.9 ip dhcp pool range
Description Congure the range of dynamic addresses issued to DHCP-clients of a subnet.
The range is set by start and end IP-addresses or the start address and size.
The network interface to which the settings are applied is chosen
automatically. Address of the chosen interface is used as the default gateway
and DNS-server, if other addresses are not specied using commands ip dhcp
pool default-router and ip dhcp pool dns-server.
Command with no prex removes the range.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-dhcp-pool)> range ‹begin› ( ‹end› | ‹size› )
(cong-dhcp-pool)> no range
Arguments
DescriptionValueArgument
Pool's start address.IP-addressbegin
Pool's end address.IP-addressend
Pool size.Integersize
Example
(config-dhcp-pool)> range 192.168.15.43 3
pool "_WEBADMIN" range has been saved.
History
Version Description
The ip dhcp pool range command has been introduced.2.00
Command Reference Guide — Keenetic Lite (KN-1310)
158
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English