KeeNetic Lite KN-1310 User Manual

(cong-dyndns)> no send-address
Example
(config-dyndns)> send-address
DynDns::Profile: a send address enabled.
History
Version Description
The dyndns prole send-address command has been
introduced.
2.03
3.15.4 dyndns prole type
Description Set DynDns type depending on the site where the domain name was
registered.
Prex no Yes
Change settings Yes
Multiple input No
Synopsis
(cong-dyndns)> type ‹type›
(cong-dyndns)> no type
Arguments
DescriptionValueArgument
type Used if the domain name was registered
on the dyndns.com
3
site.
dyndns
Used if the domain name was registered
on the no-ip.com
4
site.
noip
Used if the domain name was registered
on the rucenter
5
site.
rucenter
Used if the domain name was registered
on the other site (dened with dyndns
prole url command).
custom
Example
(config-dyndns)> type dyndns
DynDns::Profile: "test": type saved.
History
Version Description
The dyndns prole type command has been introduced.2.00
3
http:\\www.dyndns.com
4
http:\\www.no-ip.com
5
http:\\www.dns-master.ru
Command Reference Guide — Keenetic Lite (KN-1310)
76
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English