KeeNetic Lite KN-1310 User Manual

Arguments
DescriptionValueArgument
Auto-scan probe interval in
seconds. By default, the value 30
is used.
Integerinterval
Example
(config-hotspot)> auto-scan interval 10
Hotspot::Discovery::Manager: Auto-scan probe interval is set to ►
10 s.
(config-hotspot)> auto-scan no interval
Hotspot::Discovery::Manager: Auto-scan probe interval reset to ►
default.
History
Version Description
The ip hotspot auto-scan interval command has been
introduced.
2.08
3.25.3 ip hotspot auto-scan passive
Description Set passive autoscan rate in hosts per seconds.
Command with no prex resets setting to default.
Prex no Yes
Change settings Yes
Multiple input No
Interface type IP
Synopsis
(cong-hotspot)> auto-scan passive ‹rate› hps
(cong-hotspot)> no auto-scan passive
Arguments
DescriptionValueArgument
Passive autoscan rate. By default,
the value 3 is used.
Integerrate
Example
(config-hotspot)> auto-scan passive 5 hps
Hotspot::Discovery::Manager: Auto-scan rate is set to 5 hps.
(config-hotspot)> auto-scan no passive
Hotspot::Discovery::Manager: Auto-scan rate reset to default.
History
Version Description
The ip hotspot auto-scan passive command has been
introduced.
2.08
Command Reference Guide — Keenetic Lite (KN-1310)
164
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English