KeeNetic Lite KN-1310 User Manual

DescriptionValueArgument
The source address in the header
of IP-packet.
IP-addresssource
Mask to be applied to the source
address in the header of IP-packet
IP-masksource-mask
before comparison with source.
There are two ways to enter the
mask: the canonical form (for
example, 255.255.255.0) and the
form of prex bit length (for
example, /24).
Source port in the TCP or UDP
header.
Integersource-port
The end of the source range of
ports.
Integersource-end-port
src-port-operator Operator “less” to compare the
port with the specied
source-port.
lt
Operator “equal” to compare the
port with the specied
source-port.
eq
Operator “greater” to compare the
port with the specied
source-port.
gt
The destination address in the
header of IP-packet.
IP-addressdestination
Mask to be applied to the
destination address in the header
IP-maskdestination-mask
of IP-packet before comparison
with destination. There are two
ways to enter the mask: in the
canonical form (for example,
255.255.255.0) and in the form of
prex with bit length (for example,
/24).
Destination port in the TCP or UDP
header.
Integerdestination-port
The end of the destination range
of ports.
Integerdestination-end-port
dst-port-operator Operator “less” to compare the
port with the specied
destination-port.
lt
Operator “equal” to compare the
port with the specied
destination-port.
eq
Command Reference Guide — Keenetic Lite (KN-1310)
34
Chapter 3 Command Reference

KeeNetic Lite KN-1310 Specifications

General

Brand	KeeNetic
Model	Lite KN-1310
Category	Network Router
Language	English