2600AS-901-01 Rev. B / September 2008 Return to Section Topics 13-9
Series 2600A System SourceMeter® Instruments Reference Manual Section 13: Test Script Builder (TSB)
Figure 13-6
Creating a new script file
Renaming a project folder and/or script file
When a new project is created, a script file (named “main”) is also created and placed in the
Folder.
Figure 13-7 shows a project folder and script file that has been created and added to the
Project Navigator. As shown, the project folder name and a script file name can be changed.
A) Open the New TSP File window as follows:
Click FILE to display the drop-down file menu. From
the menu, click New and then click TSP File.
OR
In the Project Navigator, right-click the project folder for
the script file. From the drop-down menu, click New
and then click TSP File.
B) In the New TSP File window, make sure the desired
project folder is selected. A folder is selected by clicking it.
C) Type in a file name (e.g., Test4) and click Finish:
To Next Page
Loading...
