2600AS-901-01 Rev. B / September 2008 Return to Section Topics 13-11
Series 2600A System SourceMeter® Instruments Reference Manual Section 13: Test Script Builder (TSB)
Figure 13-8
Changing a launch configuration
Reference links for labels A through G shown in Figure 13-8:
A Starting Test Script Builder
B Opening communications
C Displaying the launch configuration window
D Selecting a configuration
E Selecting script files and launch order
F Selecting the type of launch
G Storing the script
Displaying the launch configuration window
A launch is configured from the Run dialog box. As shown in Figure 13-9, use the toolbar at the top
of the Test Script Builder to open the launch configuration window.
Start
Test Script
Builder
Open a
Resource
Select
Communications
Interface
Load-Only or
Load-and-Run
Select
TSP
Application
Select
Launch
Type
Select
Series 2600
Storage
Volatile or
Non-Volatile
Select Scipt Files
Set Launch
Sequence
Script
Project
AB D
Launch Configuration
EFG
Open Run
Dialog Box
C
Ready To
Launch
To Next Page
Loading...
Need help?
General
