Keithley 2600a series - Page 400

19-78 Return to Section Topics 2600AS-901-01 Rev. B / September 2008
Section 19: Remote Commands Series 2600A System SourceMeter® Instruments Reference Manual
lan.status.port.dst
Attribute The LAN dead socket termination (DST) port number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage port = lan.status.port.dst
port Dead socket termination socket port.
Remarks • Stores the DST port number.
• To reset all LAN connections, open a connection to the DST port number.
lan.status.port.rawsocket
Attribute LAN raw socket connection port number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage port = lan.status.port.rawsocket
port Returns the raw socket port number.
Remarks • Stores the TCP port number used to connect the instrument and to control the instrument over a
raw socket communication interface.
lan.status.port.telnet
Attribute LAN telnet connection port number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage port = lan.status.port.telnet
port The telnet port number.
Remarks • This attribute stores the TCP port number used to connect to the instrument over a
VXI-11 interface.
lan.status.port.vxi11
Attribute LAN VXI-11 connection port number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage port = lan.status.port.vxi11
port VXI-11 port number.
Remarks • This attribute stores the TCP port number used to connect to the instrument over a VXI-11
interface.