Keithley 2600a series User Manual

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 19-179
Series 2600A System SourceMeter® Instruments Reference Manual Section 19: Remote Commands
status.operation.instrument.trigger_timer.trigger_overrun.condition
status.operation.instrument.trigger_timer.trigger_overrun.enable
status.operation.instrument.trigger_timer.trigger_overrun.event
status.operation.instrument.trigger_timer.trigger_overrun.ntr
status.operation.instrument.trigger_timer.trigger_overrun.ptr
Attribute Operation status trigger timer overrun register set.
Default 0
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage Reads condition, enable, event, NTR, and PTR registers:
operreg =
status.operation.instrument.trigger_timer.trigger_overrun.condition
operreg =
status.operation.instrument.trigger_timer.trigger_overrun.enable
operreg =
status.operation.instrument.trigger_timer.trigger_overrun.event
operreg =
status.operation.instrument.trigger_timer.trigger_overrun.ntr
operreg =
status.operation.instrument.trigger_timer.trigger_overrun.ptr
Writes to enable, NTR, and PTR registers:
status.operation.instrument.trigger_timer.trigger_overrun.enable =
operreg
status.operation.instrument.trigger_timer.trigger_overrun.ntr =
operreg
status.operation.instrument.trigger_timer.trigger_overrun.ptr =
operreg
Set operreg to one of the following values:
0 Clears all bits.
status.operation.instrument.trigger_timer.trigger_overrun.TMR1
Sets TMR1 bit (B1).
status.operation.instrument.trigger_timer.trigger_overrun.TMR2
Sets TMR2 bit (B2).
status.operation.instrument.trigger_timer.trigger_overrun.TMR3
Sets TMR3 bit (B3).
status.operation.instrument.trigger_timer.trigger_overrun.TMR4
Sets TMR4 bit (B4).
status.operation.instrument.trigger_timer.trigger_overrun.TMR5
Sets TMR5 bit (B5).
status.operation.instrument.trigger_timer.trigger_overrun.TMR6
Sets TMR6 bit (B6).
status.operation.instrument.trigger_timer.trigger_overrun.TMR7
Sets TMR7 bit (B7).
status.operation.instrument.trigger_timer.trigger_overrun.TMR8
Sets TMR8 bit (B8).
operreg can also be set to the decimal weight of the bit to be set. Example:
To set bit B6 (TMR6), set operreg to 64 (2
6
).

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English