Keithley 2600a series User Manual

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 19-203
Series 2600A System SourceMeter® Instruments Reference Manual Section 19: Remote Commands
status.system5.condition
status.system5.enable
status.system5.event
status.system5.ntr
status.system5.ptr
Attribute TSP-Link system summary register 5 set.
Default 0
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage Reads condition, enable, event, NTR, and PTR registers:
enablereg = status.system5.condition
enablereg = status.system5.enable
enablereg = status.system5.event
enablereg = status.system5.ntr
enablereg = status.system5.ptr
Writes to enable, NTR, and PTR registers:
status.system5.enable = enablereg
status.system5.ntr = enablereg
status.system5.ptr = enablereg
Set enablereg to one of the following values:
0 Clears all bits.
status.system5.EXTENSION_BIT Sets EXT bit (B0).
status.system5.EXT Sets EXT bit (B0).
status.system5.NODE57 Sets node bit (B1)
status.system5.NODE58 Sets node bit (B2)
status.system5.NODE59 Sets node bit (B3)
status.system5.NODE60 Sets node bit (B4)
status.system5.NODE61 Sets node bit (B5)
status.system5.NODE62 Sets node bit (B6)
status.system5.NODE63 Sets node bit (B7)
status.system5.NODE64 Sets node bit (B8)
Remarks • In an expanded system (TSP-Link), These attributes are used to read or write to the system
summary register 5 registers.
• Reading a system summary register returns a numeric value whose binary equivalent indicates
which register bits are set. The bits of the system summary register 5 register are identified as
follows:
• For example, assume value 9 is returned for the enable register. The binary equivalent is
0000000000001001. This value indicates that bit 0 (EXT) and bit 3 (Node 59) are set.
Details See System Summary Event Registers in Appendix C.
Also see status.system, status.system2, status.system3, status.system4
Example Sets the extension bit of the system summary register 5 enable register:
status.system5.enable = status.system5.EXT
Bit B0 - EXT bit
Bit B1 - Node 57
Bit B2 - Node 58
Bit B3 - Node 59
Bit B4 - Node 60
Bit B5 - Node 61
Bit B6 - Node 62
Bit B7 - Node 63
Bit B8 - Node 64
Bit B9 through Bit B15 -
Not used

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English