13
Remote Operations
• Differences: Remote vs. Local Operation — Summarizes remote operation enhance-
ments and local-to-remote and remote-to-local transitions.
• Selecting an Interface — Describes how to select between the GPIB and RS-232
interfaces.
• GPIB Operation — Covers GPIB bus standards, bus connections, and primary address
selection.
• General Bus Commands — Describes general bus commands used for fundamental
GPIB control.
• Front Panel GPIB Operation — Summarizes GPIB error messages, status indicators,
and using the LOCAL key.
• Programming Syntax — Describes the basic programming syntax for both common
and SCPI commands.
• RS-232 Interface Operation — Outlines use of the RS-232 interface to control the
SourceMeter via remote.
To Next Page
Loading...
