Keithley 6430

17-50 SCPI Command Reference
:SOURce2 <name>
:FORMat:SOURce2 <name> Set SOUR2 and TTL response formats
Parameters <name> = ASCii ASCII format
HEXadecimal Hexadecimal format
OCTal Octal format
BINary Binary format
Query :SOURce2? Query response format
Description This command controls the response format for all CALC2:XXXX:SOUR2
and SOUR2:TTL queries in a manner similar to formats set by the
FORM:SREG command. See Calculate subsystems and SOURce subsystem
topics for details.
CALC data elements
:CALCulate <item list>
:FORMat:ELEMents:CALCulate <item list> Set CALC data elements
Parameters <item list> = CALC Include CALC1 or CALC2 data
TIME Include timestamp
STATus Include status information
NOTE Each item in the list must be separated by a comma (for example, :CALCulate
CALC,TIME,STAT).
Query :CALCulate? Query CALC data element list
Description This command allows you to retrieve timestamp and status information with
the CALC1:DATA? And CALC2:DATA? queries. It also allows you to
retrieve timestamp and status information from the buffer when
TRACe:FEED is set to CALC1 or CALC2. See Calculate subsystems for a
complete description of CALC1 and CALC2. See also Data elements for a
description of TIME and STATus information.