SCPI Command Reference 17-7
Command Description
Default
parameter
SCPI
Source
memory
:CALCulate2
:CLIMits
:FAIL
:SOURce2 <NRf>
| <NDN>
:SOURce2?
:SMLocation <NRf>
| NEXT
:SMLocation?
:CALCulate3
:FORMat <name>
:FORMat?
:DATA?
Define “fail” digital output pattern:
Specify output “fail” pattern: (0 to 7, 3-bit;
0 to 15, 4-bit).
2
Query “fail” bit pattern.
1
Specify next “FAIL” Source Memory Location
(NEXT location or 1 to 100).
Query “FAIL” memory location.
Subsystem to control CALC3:
Specify math format (MEAN, SDEViation,
MAXimum, MINimum, or PKPK).
Query math format.
Read math result of CALC3.
15 or 7
NEXT
MEAN
✓
✓
✓
✓
✓
1
The format (ASCII, hexadecimal, octal, or binary) for the returned value is set by FORMat:SOURce2 <name>.
2
Default based on present digital output size (:SOURce2:BSIZe <n>). 3-bit default is 7. 4-bit default is 15. 16-bit default is 65535.
Table 17-1 (cont.)
CALCulate command summary
To Next Page
Loading...
