A-6 Specifications
PREAMP GUARD OUTPUT RESISTANCE: 110kΩ.
SOURCE OUTPUT MODES:
Fixed DC level
Memory List (mixed function)
Stair (linear and log)
SOURCE MEMORY LIST: 100 points max.
MEMORY BUFFER: 5,000 readings @ 5½ digits (two 2,500 point buffers). Includes selected measured value(s) and time stamp. Lithium bat-
tery backup (3 yr+ battery life).
PROGRAMMABILITY: IEEE-488 (SCPI-1995.0), RS-232, 5 user-definable power-up states plus factory default and *RST.
DIGITAL INTERFACE:
Safety Interlock:
Active low input.
Handler Interface: Start of test, end of test, 3 category bits. +5V @ 300mA supply.
Digital I/O: 1 trigger input, 4 TTL/Relay Drive outputs (33V @ 500mA sink, diode clamped).
POWER SUPPLY: 100V–240V rms, 50–60Hz (automatically detected at power up), 100VA max.
WARRANTY: 1 year.
EMC: Conforms with European Union Directive 89/336/EEC EN 55011, EN 50082-1, EN 61000-3-2 and 61000-3-3, FCC part 15 class B.
SAFETY: Conforms with European Union Directive 73/23/EEC EN 61010-1.
VIBRATION: MIL-PRF-28800F, Class 3.
WARM-UP: 1 hour to rated accuracies.
DIMENSIONS: 89mm high × 213mm wide × 370mm deep (3
1
⁄
2
in × 8
3
⁄
8
in × 14
9
⁄
16
in). Bench Configuration (with handle & feet): 104mm high ×
238mm wide × 370mm deep (4
1
⁄
8
in × 9
3
⁄
8
in × 14
9
⁄
16
in).
Amplifier: 20mm high × 57mm wide × 97mm deep (0.783 in × 2.225 in × 3.75 in).
WEIGHT: 3.45kg (7.61 lbs).
ENVIRONMENT:
Operating:
0°–40°C, 60% R.H. (non-condensing) up to 35°C. Derate 5% R.H./°C, 35°–40°C.
Storage: –25°C to 65°C. Non-condensing humidity.
ACCESSORIES SUPPLIED:
Model 6430-322-1 Low Noise Triax Cable, 3-slot triax to alligator clips, 20cm (8 in)
Model 8607 Safety High Voltage Dual Test Leads
Model CA-186-1 Banana Lead to Screw Terminal Adapter
Specifications subject to change without notice.
To Next Page
Loading...
Need help?
General
