Keithley 6430 User Manual

IEEE-488 and SCPI Conformance Information E-3
Table E-1
IEEE-488 documentation requirements
Requirements Description or reference
(1)
(2)
(3)
(4)
(5)
(a)
(b)
(c)
(d)
(e)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
IEEE-488 Interface Function Codes.
Behavior of SourceMeter when the address is set outside the
range 0-30.
Behavior of SourceMeter when valid address is entered.
Power-On Setup Conditions.
Message Exchange Options:
Input buffer size.
Queries that return more than one response message unit.
Queries that generate a response when parsed.
Queries that generate a response when read.
Coupled commands.
Functional elements required for SCPI commands.
Buffer size limitations for block data.
Syntax restrictions.
Response syntax for every query command.
Device-to-device message transfer that does not follow rules
of the standard.
Block data response size.
Common Commands implemented by SourceMeter.
Calibration query information.
Trigger macro for *DDT.
Macro information.
Response to *IDN (identification).
Storage area for *PUD and *PUD?.
Resource description for *RDT and *RDT?.
Effects of *RST, *RCL and *SAV.
*TST information.
Status register structure.
Sequential or overlapped commands.
Operation complete messages.
See Appendix D.
Cannot enter an invalid address.
Address changes and bus resets.
Determine by :SYSTem:POSetup. See
Section 17.
2048 bytes.
None.
All queries (Common Commands and
SCPI).
None.
See Table E-2.
Contained in SCPI command subsystems
tables (see Tables 17-1 through 17-10).
Block display messages: 32 characters
max.
See Section 13, Programming syntax.
See Section 13, Programming syntax.
None.
See Section 17, FORMat subsystem.
See Section 15, Common commands.
See Service Manual.
Not applicable.
Not applicable.
See Section 15, Common commands.
Not applicable.
Not applicable.
See Section 15, Common commands.
See Section 15, Common commands.
See Section 14, Status structure.
All are sequential except :INIT.
*OPC, *OPC? and *WAI; see Section 15,
Common commands.

Keithley 6430 Specifications

General

Brand	Keithley
Model	6430
Category	Measuring Instruments
Language	English