1-32 Getting Started
Table 1-10
Output and display configuration menus
Configuration menu item Description
CONFIG ON/OFF OUTPUT Configure output.
CONFIGURE OUTPUT
OFF STATE Set up output off state.
NORMAL Normal off state.
ZERO Zero off state.
GUARD Guard mode off state.
AUTO OFF Enable disable auto off mode.
DISABLE Keep output on.
ENABLE Turn output off after each measurement.
INTERLOCK Enable/disable interlock.
DISABLE Disable interlock.
ENABLE Enable interlock.
CONFIG EDIT or TOGGLE Enable/disable display.
DISABLE DISPLAY
NOW Disable display immediately.
NEVER Never disable display.
SWEEP Turn display off during sweep.
STORE Turn display off during buffer store.
To Next Page
Loading...
Need help?
General
