3
Basic Source-Measure
Operation
•
Operation Overview
— Discusses source-measure capabilities, compliance limit, and
fundamental source-measure configuration.
•
Operation Considerations
— Covers warm-up, auto zero, V-source protection, and
source delay.
•
Basic Source-Measure Procedure
— Describes the basic procedure for setting up the
SourceMeter for source-measure operations, including selecting the source function,
output values, and compliance limits; choosing measurement range and function; and
turning the output on and off.
•
Measure Only
— Covers how to use the SourceMeter for measurements only.
•
Sink Operation
— Describes sink operation.
To Next Page
Loading...
