Keysight E4981A - Turning ON;OFF Comparator Function; Setup Procedure

122 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Sorting Based on Measured Results (Comparator Function)
Turning ON/OFF Comparator Function
7-
Turning ON/OFF Comparator Function
The ON/OFF state of the comparator function also controls the ON/OFF state
of the output of the handler interface signal.
Setup procedure
Step 1. Press [Meas Setup].
Step 2. Press the LIMIT TABLE softkey.
Step 3. Use the cursor keys to select the COMP field.
Step 4. Use the following softkeys:
Softkey Function
ON Turns ON the comparator function.
OFF Turns OFF the comparator function.