28 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Overview
Rear Panel: Names and Functions of Parts
2-
3. LAN port
The port to connect the E4981A to a LAN (Local Area Network). Connecting
this instrument to a LAN enables you to control this instrument by using
SICL-LAN or telnet, or from an external PC via a Web server.
This is compliant with LXI standard (LAN eXtensions for Instrumentation):
version 1.2 Class C.
Connector type: 8-pin RJ-45 connector
Compliance Standard: 10 Base-T/100 Base-TX Ethernet (automatic data rate
selection)
4. External trigger input connector
The BNC connector to input the positive/negative TTL pulse to trigger the
E4981A with external trigger signals.(The trigger mode must be set to
EXTernal.)
5. Serial number plate
The seal showing the product’s serial number.
To Next Page
Loading...
