Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 135
Sorting Based on Measured Results (Comparator Function)
Making a Beep Based on Sorting Judgment Result
Making a Beep Based on Sorting Judgment Result
You can set the conditions for making a beep sound, based on the sorting
judgment result, to one of the following.
• Makes a beep when the sorting judgment result is OUT_OF_BINS, AUX_BIN
or OVLD and LOWC_OR_NC.
• Makes a beep when the sorting judgment result is BIN1 to BIN9.
You can also disable the beep sound.
For the procedure on how to set up the beep output, refer to “Setting Up
Condition To Make A Beep” on page 67.
To Next Page
Loading...
